Production Process:

1.The ratio of quicksand powder is 1:1000ML.
If you want the flow to be slower, put in a little more, if you want to flow faster, put in less and adjust slowly.
The ratio of water and powder should be appropriate, shake for 1 minute to fully dissolve, then stand still for 2 minutes, and finally use a little flash powder to test the flow rate effect.
2: When doing it, you must turn on the light to prevent the light from being turned off after it is done. When you're done, turn off the lights.
3: After finishing, do not rush to pour the glitter powder, clean the glue thread and flower glue stick, wait for the glue stick to cool down, and then go to the glitter sheet to prevent the glitter sheet from sticking to the glue stick and glue thread, which will affect the effect.
4: The main function of UV glue is to seal edges, seal holes, and mend leaks. When sealing the edge, try to cover it as much as possible. If it overflows, you can wipe it off with a wet towel, and then bake it with a UV lamp. If you make a finished product and find any leaks, you can also use UV glue to make up.

Name: diy tulip night light
Material: glue+powder+light
Specifications: pink tulips
Number of flowers: 10, 13, 16
Finished product size: 15.5*7.5*2.5cm/ 6.10 * 2.95 * 0.98 inch

List: 1 set*night light material package